1 / 3
M5Stack NanoC6 Magnetic Mount
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Share Alike
This is to magnetically mount the M5Stack NanoC6. It is designed for 6mm x 2mm magnets.
I include STEP and Fusion 360 files for easy remixing.
Features:
- Nice friction fit; arms are slightly tapered so they flex a little and maintain grip
- Front facing button + LED
- Reversible: works equally well with the USB-C or Grove connector facing up or down
- You can install / remove the NanoC6 without unplugging any cables.
- Does not block connectors or ventilation slots
- Strong part (sensible layer lines), no supports needed.
Tips:
- Print on its base - same orientation as the photos - not on its back.
- Use a drop of CA glue to secure the magnet
What do I use this for?
I have a NanoC6 loaded with ESPHome firmware controlling a Mitsubishi Heat Pump (I started with this guide). Some heat pumps are wall mounted and the NanoC6 (or other ESP32) sits inside the units plastic enclosure. I have a larger ducted unit with a metal enclosure. The NanoC6 needs to sit outside the metal enclosure to get a Wifi signal, and this simple magnetic mount keeps it neatly in place.