Vex robotics air regulator pressure gauge cap
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Our pressure gauge was dropped, which cracked its original protective cap. This is a replacement in two parts.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 1
- Wydruki
- 0
- Wyświetlenia
- 51
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Share Alike
In our lab we use a multitude of robotics parts. They sometimes have accidents at the hands of students, but often can still be salvaged. This air regulator pressure gauge is part of a pneumatics kit sold by Vex Robotics; it had an accident that broke its original cover, leaving the dial bare. The original design of the dial was not optimal for 3d printing, so I designed this one to take its place. It's pressure fitted, and held at the right height above the dial by a clip-on washer that is printed separately. To further protect the dial I popped in a lens, a stiff circle of clear petg recycled from packaging.
Printed on a Mini+ in Jessie PETG.