1 / 2
Teltonika RUT241 Flat Mount Bracket with SIM Lock and Antenna Access
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This bracket allows you to securely mount the Teltonika RUT241 router on a flat surface.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 31
- Wydruki
- 0
- Wyświetlenia
- 256
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Wall-mounted
- Licencja
- Creative Commons — Attribution
This 3D printed bracket is designed to fit the Teltonika RUT241 (also compatible with RUT240).
It lets you fix the router firmly onto a flat surface while adding protection and better cable management.
🧩 Features
- Securely mounts the RUT241 on any flat surface using screws.
- Covers one Ethernet port to improve cable stability or restrict access
- Blocks the SIM card slot to prevent accidental removal or tampering
- Keeps antenna connectors fully accessible
- Tight and precise fit with the RUT241 housing
🖨 Print settings
- Material: PETG (recommended) or ABS for heat resistance
- Infill: 20–30%
- Layer height: 0.2 mm
- Supports: Yes
- Orientation: Print the model on its side (with the flat face vertical) to limit the amount of support material and improve surface finish.
⚙ Installation
- Slide the bracket onto the RUT241 from the antenna side.
- Align the mounting holes.
- Fix it using screws on your desired surface.
- Connect antennas and power cables.