Dewalt/Porter Cable/Makita Router Bushing
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a router bushing that is a snap fit into the Dewalt DW618 router base plate.
- Ocena
- 4,667 / 5
- Polubienia
- 77
- Pobrania
- 472
- Wydruki
- 5
- Wyświetlenia
- 3454
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a set of router bushings for the Dewalt DWE618 series router. It is also compatible with Porter Cable, Makita or other routers with a 1-3/16" diameter center hole sub-base. The sizes in this set correspond to the ones found in the Porter Cable Router Template Guide (42000).
The obj files have been named for the outer guide diameter in inches. For the ¾" and 5/8" guides there is a long and short option. Included is a parameterized Fusion 360 file for easy generation of any custom bushing not included.
The parts are designed to be printed without supports for a clean fit into the baseplate.
| File Name | Inner Diameter | Outer Diameter |
| 0.3125 | ¼" (6.4 mm) | 5/16" (7.9 mm) |
| 0.375 | 9/32" (7.1 mm) | 3/8" (9.5 mm) |
| 0.4375 | 11/32" (8.7 mm) | 7/16 (11.1 mm) |
| 0.5 | 11/32" (10.3 mm) | ½" (12.7 mm) |
| 0.625 | 17/32 (13.5 mm) | 5/8" (15.9 mm) |
| 0.75 | 21/32" (16.7 mm) | ¾" (19.1 mm) |
| 0.7968 | 5/8" (15.9 mm) | 51/64" (20.2 mm) |
Any printed bushing will not be as durable as a machined metal one. Depending on your router bit size, the filament used, feeds and speeds it is possible to eat up a plastic bushing very quickly and ruin your project!