Guitar/Bass Pot Spacers
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Guitar/Bass Volume/Tone Pot Spacers in 1mm, 2mm, 3mm, 4mm and 5mm sizes.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 7
- Wydruki
- 0
- Wyświetlenia
- 59
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Gadgets
- Licencja
- Creative Commons — Public Domain
Volume/Tone Pot Spacers: I was recently changing out the tone pots on one of my Strats and the pot/switch and stacked pots had long shafts, so I made some spacers to get the height correct above the pick guard so that the knobs did not stick out. Depending on the pot and the thickness of the mounting surface (wood top or plastic/plexi pick guard, different sizes may be needed. I used a 4mm on the TBX stacked pot and a 5mm on the pot/switch (tone/coil tap), so that the height was consistent with the volume pot. Made them myself in a couple minutes, but am sharing to save others the trouble if you need these.