30mm Skirting Board / Baseboard Clip for Kitchen and Bathroom
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A clip which screws in to your baseboard and then clips to your cupboard / vanity.
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 33
- Wydruki
- 0
- Wyświetlenia
- 89
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Most of the designs on here are for 32mm posts. These are designed for 30mm ones. If you don't know your size, use some digital calipers to find out.
Printed at 0.2mm layer height in PLA at 20% infill. They work with no issues.
The original part was in 2 pieces. Mine is just one piece designed to be the same thickness as the two were together. It works perfectly and it's very sturdy.
If this model is useful to you, consider checking out my YouTube channel (https://www.youtube.com/@RepairWins) I cover electronics repair, electronics modding, the odd DIY project, woodworking (if you stand a mile away and squint) and much more.