1 / 1
SKR Mini E3 - 80mm Cooling Fan Mount
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Remixed for a 80mm fan.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 16
- Wydruki
- 0
- Wyświetlenia
- 77
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I printed with 3 wall count and 15% infill. Very strong using regular PLA.
M3 slides right through without much restriction for the board mount.
The fan holes are self-tapping though so you could/should get the bolts started before mounting the fan.
Takes about 9grams of filament and maybe 30 minutes.
Print without supports for the counterbore holes as they are a pain to get out.