nVent HOFFMAN Easy-Mount Bars - Install without opening the lid
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
External mounting brackets for nVent junction boxes. Mount your box to the wall without opening the lid or breaking the
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 2
- Wydruki
- 0
- Wyświetlenia
- 24
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution
Compatible Models: This bracket is designed for the nVent HOFFMAN DPCP series with a 122x120mm footprint. It works regardless of the box height or lid type (Transparent/Grey).
Verified fit for:
DPCP121206GE
DPCP121206TE
DPCP121209GE
DPCP121209TE
(It likely fits other models with the same 122x120mm base pattern).
The Problem: Standard nVent HOFFMAN enclosures usually require opening the lid to access the mounting holes. This risks compromising the IP66/67 seal and is inconvenient if electronics are already installed.
The Solution: These external mounting bars attach to the back of the enclosure using the original mounting points.
Zero-Intrusion: Mount to the wall without opening the lid.
Secure: Uses captive M4 nuts (heat-set recommended).
Material: Printed in ASA or PETG for industrial durability.
BOM (Bill of Materials) - Per Bar:
2x M4 Hex Nuts
2x M4 Screws
Assembly:
Use a soldering iron to heat-set the M4 nuts into the hexagonal pockets for a permanent fit.
Screw the bars to the back of the box.
Mount to the wall.