nVent HOFFMAN Easy-Mount Bars - Install without opening the lid
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
External mounting brackets for nVent junction boxes. Mount your box to the wall without opening the lid or breaking the
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 2
- Makes
- 0
- Views
- 24
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution
Compatible Models: This bracket is designed for the nVent HOFFMAN DPCP series with a 122x120mm footprint. It works regardless of the box height or lid type (Transparent/Grey).
Verified fit for:
DPCP121206GE
DPCP121206TE
DPCP121209GE
DPCP121209TE
(It likely fits other models with the same 122x120mm base pattern).
The Problem: Standard nVent HOFFMAN enclosures usually require opening the lid to access the mounting holes. This risks compromising the IP66/67 seal and is inconvenient if electronics are already installed.
The Solution: These external mounting bars attach to the back of the enclosure using the original mounting points.
Zero-Intrusion: Mount to the wall without opening the lid.
Secure: Uses captive M4 nuts (heat-set recommended).
Material: Printed in ASA or PETG for industrial durability.
BOM (Bill of Materials) - Per Bar:
2x M4 Hex Nuts
2x M4 Screws
Assembly:
Use a soldering iron to heat-set the M4 nuts into the hexagonal pockets for a permanent fit.
Screw the bars to the back of the box.
Mount to the wall.