Gridfinity 3.5in hard drive (HDD) storage stand
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Gridfinity storage bin for 3.5 inch hard disk drives (HDDs), in 2x4x5 grid layout.
- Ocena
- 5 / 5
- Polubienia
- 15
- Pobrania
- 165
- Wydruki
- 1
- Wyświetlenia
- 624
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Share Alike
// This is a reupload from makerworld of the remix by @penguinprints
Gridfinity storage bin for 3.5 inch hard disk drives (HDDs), in 2x4x5 grid layout.
This is a remix of a model by @thestevemarshall at https://www.printables.com/model/598975-gridfinity-35-hdd-storage/ with wider tolerances on each bay tested to fit several different brands of hard drives (Seagate, WD, Toshiba) as the old one was a bit too small to fit certain drives properly depending on printer tolerance. Edges were also optimized to use less material and letters were added to the side for organization. Same changes were made to the optional lid for stacking.
Note: Choose different print profiles for extra bins labeled A, B, C, and a second bin labeled D, E, F. Lid is in an optional print profile.