Wooden railway passenger car - Brio compatible
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Wooden railway passenger car - Brio compatible
- Ocena
- 0 / 5
- Polubienia
- 10
- Pobrania
- 37
- Wydruki
- 0
- Wyświetlenia
- 278
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Toys & Games
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Wooden railway passenger car - Brio compatible
Parts required:
2x magnet Ø 6mm x 3mm
2x M2 x 10mm screw
9x M2 x 4mm screw
Building instructions
Step 1: Install the rotation axis for the boogie

Step 2: Fix the rotation axis by use of a pentagon axis.

Step 3: Add more axis and the wheels

Step 4: Prepare both boogies

Step 5: Add the tracking frame

Step 6: Add the boogie chassis

Step 7: Fix the chassis with the bolt. You can use a screwdriver to press it inside. Make sure the hole in the bold is visible. To remove the bolt, a M2 screw can be used.

Step 8 + 9: Put the magnets into the magnet caps, so polarity is differently for each cap.


Step 10: Fix the magnet cap with M2 x 10mm.

Step 11: Install 1x M2x4mm for the boogie tracking mechanism.

Step 12: Install 6x M2x4mm screws to fix the bottom part to the upper parts

Step 13: Install bellows

Step 13: Push boogies into the upper part and install the roof. Optionally: Add the window-part inside.
