1 / 7
Organic Headphone Stand | Organic Sculpture Headphone Stand — zdjęcie 1
1 / 7

Organic Headphone Stand | Organic Sculpture Headphone Stand

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Transform your desk from a simple workspace into a gallery of modern art with this Organic Headphone Stand.

Ocena
0 / 5
Polubienia
2
Pobrania
24
Wydruki
0
Wyświetlenia
144
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Organizers
Licencja
Standard Digital File License

Organic Headphone Stand | Organic Sculpture Headphone Stand

Transform your desk from a simple workspace into a gallery of modern art with this Organic Headphone Stand. Inspired by the fluid, natural forms found in sculpture, this stand is more than just a holder—it's a piece of functional art. Its elegant, sweeping curves provide a beautiful and secure cradle for your headphones, protecting them from scratches and clutter while making a bold aesthetic statement.

This stand is the perfect centerpiece for any audiophile's listening station, a gamer's high-end setup, or a professional's minimalist desk. It serves as a constant reminder that everyday objects can be beautiful. Treat your headphones to the display they deserve and elevate your entire space with this unique, sculptural design.

Printing & Finishing

This is a single-piece print that requires some attention to detail for a perfect finish.

  • Assembly: No assembly is required. The stand is a single, continuous piece.
  • Supports are Necessary: Due to the organic overhangs and complex curves, supports are required for a clean print. Tree supports (or organic supports) are highly recommended as they will be easier to remove and will better preserve the smooth surface finish.
  • Printing Recommendations: Use PLA for ease of printing. For an even more artistic and premium feel, consider using a wood-fill or marble-fill PLA. A layer height of 0.1mm - 0.2mm and a moderate infill (around 15-20%) are recommended.
  • Pro-Tip: After removing the supports, take the time to sand the model for an exceptionally smooth, professional finish.

3D printing settings

  • Layer Height: 0.2 mm
  • Wall Line Count: 3
  • Infill: 15% (Grid)
  • Supports: Normal(Auto)
  • Material: PLA

Tagi