1 / 7
Carrera Go! Stützen Pfeiler Pillar Brücke Bridged Support for 1:43 Slotcar Race Track — zdjęcie 1
1 / 7

Carrera Go! Stützen Pfeiler Pillar Brücke Bridged Support for 1:43 Slotcar Race Track

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This is a bridged stand for building bridges with Carrera Go!!! 1:43 slotcar race tracks. Fully compatible with OEM.

Ocena
0 / 5
Polubienia
29
Pobrania
183
Wydruki
0
Wyświetlenia
861
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Vehicles
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

This is a bridged replacement stand for building bridges with Carrera Go! 1:43 slotcar race tracks.

It's an extension for https://www.printables.com/model/1078709-carrera-go-stutzen-pfeiler-pillar-support-for-143 . It is possible to combine both to build multi stacked race track levels, usable for straights and turns. 

I build this new from scratch because all existing models (same in thingiverse) are out of tolerance or are too loose or the threads are too long/too short. I also made a quite longer internal thread to hold more stiffer than the original. The base element is massive to give it more weight for a more stable stand. These Elements are fully compatible with the OEM parts.

Update: I added an extra long and an extra short version of the pillar support elements. Now the support can be lower and higher than the original. 👍😃

 

Settings

Value

Infill

25% (adaptive cubic)

Perimeters

2

Layer Height

0.2 mm Speed

Material

PETG / PLA

Supporting Material

none

Comments

printed on MK4S with MMU3 FW6.2.6

Ironing

no (not needed, but creates a cleaner surface)

Feedback is welcome.

Share your makes!

Tagi