LOGOCLIC K40 Connectors and ends
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Printable connectors and end-pieces for LOGOCLIC®-brand skirting board K40
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 64
- Wydruki
- 1
- Wyświetlenia
- 657
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Home Decor
- Licencja
- Creative Commons — Attribution — Noncommercial
These are adapter pieces for the LOGOCLIC®-brand classic skirting board K40
https://www.logoclic.info/en/accessories/laminate-skirtings/classic-skirting-boards/skirting-board-k40
Because of the high price and low availability of color options to standard transition- and end-pieces to the k40 profile, I have created a matching substitute 3D-model that you can print for yourself, plus a few extra types of adapters. They aren't exactly like the ones you get at the store, but I guarantee they're worth trying out before shelling beaucoup bucks on the standard ones.
Works well with fuzzy-mode too!
Tested with 0.4mm nozzle at 0.2mm settings, use big (+5mm) brim and supports where needed, all should print nicely “right side up”. Standard settings should be good with PLA.
Mine were printed on a MK3S+ with Prusament jet black
If your'e renovating and want to do some more profiles, like for example the trim-piece connector that you can see in one of the photos with the cable pass through, I'll be happy to supply anyone with the .step-files from which to work from, just let me know.