Brassmaster GGG Stompbox
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Stompbox based on the Brassmaster clone project from GGG. If you like it buy me a coffee! https://ko-fi.com/ilrost
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 5
- Wydruki
- 0
- Wyświetlenia
- 51
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Audio
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
If you like it buy me a coffee! https://ko-fi.com/ilrost
This stompbox is based on the Brassmaster clone project from GeneralGuitarGadgets.
If you’re the plug-and-play type, you can simply order the PCB with all the components.
If you’re a bit more adventurous (like me), you can print and build everything at home.
https://generalguitargadgets.com/effects-projects/bass/maestro-brass-master/
The enclosure is designed for the 3-knob version and includes a dedicated compartment for a 9V battery.
The parts list for the stompbox can be found at the following link:
https://generalguitargadgets.com/pdf/ggg_brassm_bom.pdf
I used M3 heat-set inserts to mount the PCB and secure the case.
it was designed to accommodate a LED case
DC Jack switch specs
it is necessary
- 8 M3x5.7x4.6 insert nuts brass
- 4 M3x10 countersunk screw
- 4 M3x10 plastic screw screws with plastic washer for PCB
- 1 LED Holder panel diameter 8mm
- 1 DC jack switch
The top shell is made of three additional plates that can be printed separately and glued together, or printed as a multi-color/multi-material piece. It’s compatible with any 3D printer.
Full wiring details can be found on the project page.
https://generalguitargadgets.com/effects-projects/bass/maestro-brass-master/