Brassmaster GGG Stompbox
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Stompbox based on the Brassmaster clone project from GGG. If you like it buy me a coffee! https://ko-fi.com/ilrost
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 5
- Makes
- 0
- Views
- 51
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Audio
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
If you like it buy me a coffee! https://ko-fi.com/ilrost
This stompbox is based on the Brassmaster clone project from GeneralGuitarGadgets.
If you’re the plug-and-play type, you can simply order the PCB with all the components.
If you’re a bit more adventurous (like me), you can print and build everything at home.
https://generalguitargadgets.com/effects-projects/bass/maestro-brass-master/
The enclosure is designed for the 3-knob version and includes a dedicated compartment for a 9V battery.
The parts list for the stompbox can be found at the following link:
https://generalguitargadgets.com/pdf/ggg_brassm_bom.pdf
I used M3 heat-set inserts to mount the PCB and secure the case.
it was designed to accommodate a LED case
DC Jack switch specs
it is necessary
- 8 M3x5.7x4.6 insert nuts brass
- 4 M3x10 countersunk screw
- 4 M3x10 plastic screw screws with plastic washer for PCB
- 1 LED Holder panel diameter 8mm
- 1 DC jack switch
The top shell is made of three additional plates that can be printed separately and glued together, or printed as a multi-color/multi-material piece. It’s compatible with any 3D printer.
Full wiring details can be found on the project page.
https://generalguitargadgets.com/effects-projects/bass/maestro-brass-master/