Fridge Door Rail for Kenmore (253.6321201D)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Designed a bracket for my Kenmore fridge and used scrap wood for the rail
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 23
- Wydruki
- 0
- Wyświetlenia
- 212
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution
I took measurements of the fridge door features that interface with the bracket and tried to reduce the design to its simplest parts. The result is a design that I feel is both simple and appropriate for FDM printing.
Brackets were printed in PETG because of its strength and semi-flex, but I imagine PLA would be fine. Printed with 4 walls and 15% infill.
You can block supports for all overhangs except for the tip of the top square/window (see last image for reference)
The length to cut the wood is 566mm or 56.6cm
If you found this model helpful and would like to make a donation, it would mean a lot to me. Thank you ko-fi.com/eddiesierra