Fridge Door Rail for Kenmore (253.6321201D)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Designed a bracket for my Kenmore fridge and used scrap wood for the rail
- Rating
- 0 / 5
- Likes
- 6
- Downloads
- 23
- Makes
- 0
- Views
- 212
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Kitchen
- License
- Creative Commons — Attribution
I took measurements of the fridge door features that interface with the bracket and tried to reduce the design to its simplest parts. The result is a design that I feel is both simple and appropriate for FDM printing.
Brackets were printed in PETG because of its strength and semi-flex, but I imagine PLA would be fine. Printed with 4 walls and 15% infill.
You can block supports for all overhangs except for the tip of the top square/window (see last image for reference)
The length to cut the wood is 566mm or 56.6cm
If you found this model helpful and would like to make a donation, it would mean a lot to me. Thank you ko-fi.com/eddiesierra