1 / 26
Lithopahe Rotating Frame Light — zdjęcie 1
1 / 26

Lithopahe Rotating Frame Light

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Yet another lithophane frame and lamp.

Ocena
0 / 5
Polubienia
12
Pobrania
9
Wydruki
0
Wyświetlenia
78
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Home Decor
Licencja
Creative Commons — Attribution — Share Alike

Yes yet another lithophane lamp. I used esp32c3 in the model but you can also use esp8266. I leave links for the parts I use down below.

Assembly might seem tricky but not at all, I enjoyed  while I design and assembly all the parts. All electronics parts are accessible on internet. A nice gift to give to you friends, I prepared this one for a friend of mine.

Start with the soldering all the cable, you can follow from the pictures. Before fixing LEDs onto model make sure they work.

Very top cover can be printer separately or together with the LED shader if you have a printer with multi filament support. I used PETG for the whole model because when you turn the light on full brightness it gets warm and PLA might bend and deform. I recommend printing the LED bases with PETG, and you can use any material you want for outside.

I used two types of screws. Both are 2mm but one is self tapping one that you don't need nut for. Even glue is an option if you dare.

esp32c3
esp8266

ws2812 LEDS 8led boards and 45 LED circle 

Bearing ZZ6706

Cables you can use 3pin version the rest of the cabling is just scrap ethernet cable :)

TTP223 Touch Button

Screw and Nuts
Self tapping screws
  

Tagi