Lithopahe Rotating Frame Light
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Yet another lithophane frame and lamp.
- Rating
- 0 / 5
- Likes
- 12
- Downloads
- 9
- Makes
- 0
- Views
- 78
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Home Decor
- License
- Creative Commons — Attribution — Share Alike
Yes yet another lithophane lamp. I used esp32c3 in the model but you can also use esp8266. I leave links for the parts I use down below.
Assembly might seem tricky but not at all, I enjoyed while I design and assembly all the parts. All electronics parts are accessible on internet. A nice gift to give to you friends, I prepared this one for a friend of mine.
Start with the soldering all the cable, you can follow from the pictures. Before fixing LEDs onto model make sure they work.
Very top cover can be printer separately or together with the LED shader if you have a printer with multi filament support. I used PETG for the whole model because when you turn the light on full brightness it gets warm and PLA might bend and deform. I recommend printing the LED bases with PETG, and you can use any material you want for outside.
I used two types of screws. Both are 2mm but one is self tapping one that you don't need nut for. Even glue is an option if you dare.
esp32c3
esp8266
ws2812 LEDS 8led boards and 45 LED circle
Cables you can use 3pin version the rest of the cabling is just scrap ethernet cable :)
