GameCube Backplate & Flippy Drive Micro SD Card Extender
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A Replicated GameCube Backplate, plus a FlippyDrive Micro SD Card extender Backplate.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 20
- Wydruki
- 0
- Wyświetlenia
- 161
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Video Games
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
For printing the model, I would recommend organic support. You don't need it for the vent grills, so you may want to manually paint it. Otherwise Everywhere should work in Prusaslicer.
If you are printing the MicroSD Card slot. The screw holes are designed for M2 screws and threaded inserts, or M3 Screws without. I wouldn't recommend M3 as it's too big for the MicroSD Card adapter I used. You'll also need to print the updated Bracket to ensure that the MicroSD Card extender can reach the Flippy Drive
For the MicroSD Card extender I used this one from Amazon: https://www.amazon.ca/dp/B09CKRDFTH
UCTRONICS Micro SD Male to Female Flexible Extender, 15cm/5.9in
NOTE: I do not have a DOL-001 the size for the Digital and Analog out is based on the cutouts on my DOL-101. If there needs to be adjustments please let me know or update the CAD files here: https://github.com/the16bitgamer/16BitVirtualStudiosDesigns/tree/main/Misc/Flippy%20Drive