reinforced distressed vornai skadis board panel 220x220x5.1
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
220x220x5.1 skadis board skeletonized in fractals.
- Ocena
- 0 / 5
- Polubienia
- 10
- Pobrania
- 41
- Wydruki
- 1
- Wyświetlenia
- 353
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Public Domain
Give your IKEA SKÅDIS wall system a modern, designer look with this fully custom distressed reinforced Voronoi panel, sized to perfectly match the original 220×220×5.1 mm SKÅDIS tile.
Strengthened geometric lines + clean textured finish. im pairing 3 of these with 3 of the skadis panels i remixed from for my board.
This panel was designed from the ground up for:
Style – organic fractured pattern with a modern aesthetic
Strength – reinforced connections and thicker load paths
Accuracy – hole spacing and frame size match SKÅDIS exactly
Compatibility – fits all OEM SKÅDIS hooks, shelves, and accessories
Quality – tested and printed in PLA Pro with a textured PEI finish
Whether you’re organizing tools, cables, chargers, or just want your SKÅDIS to look cooler — this panel is the perfect drop-in replacement.
✔ Perfect 1:1 SKÅDIS hole alignment
✔ 220 mm × 220 mm × 5.1 mm exact dimensions
✔ Reinforced Voronoi structure for improved rigidity
✔ Lightweight design with strong perimeter frame
✔ Works with ALL SKÅDIS mounts, hooks, clips, and holders
✔ Fast, clean print on most printers
✔ Looks AMAZING on textured PEI beds (powder-coat style finish)
Material: PLA Pro (tested), PLA+, PETG, ABS, ASA
Layer Height: 0.2 mm
Walls/Perimeters: 3
Top/Bottom Layers: 3
Infill: 15%
Cooling: 100% for PLA
No Supports Required
Bed: Textured PEI recommended
Extruder Temp: 205–215°C (PLA Pro)
Bed Temp: 55–60°C (PLA Pro)
All preview photos were printed in overture black PLA Pro on a textured PEI bed for a premium powder-coated look.