1 / 5
Raspberry Pi Camera case with DAISO lens mount
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Raspberry Pi Camera case which is able to mount the smartphone lens sold by DAISO, and the NeoPixel(WS2812B).
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 47
- Wydruki
- 0
- Wyświetlenia
- 674
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial
SzczegółyPliki (6)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (24)Powiązane
What's this?
Raspberry Pi Camera case which is able to mount the smartphone lens sold by DAISO, and the NeoPixel(WS2812B). And also this has 2 hinges for changing angular.
But, yes. I know. A NeoPixel in this model is not work enough to use in perfect dark situation as a light(If you wanna use this as a light too, Please check pictures before build this).
BOM
- DAISO Smartphone lens set x1
- Raspberry Pi Camera V2 x1
- NeoPixel WS2812B x1
- Cable for NeoPixel(AWG26 or AWG28)
- M2 insert nut(L3.0 or L4.0 x D3.5) x4
- M2x5 or M2x6 screw x4
- M2x8 screw x2
- M2 nut x2
- Printed parts(VOLUME needed 2 pcs)
How to assemble
- Put insert nuts into a FRONT part with the soldering iron.
- Put screws into both of VOLUMES with the soldering iron(Don't burn yourself!!).
- Put nut in a slit on a REAR part(It may be a little tight. Use thin tools).
- Put nut in a hole on a FOOT part.
- Solder cables to a NeoPixel(VDD, VSS and DIN).
- Put a NeoPixel into a FRONT part.
- Sandwich the Raspberry Pi Camera between a FRONT part and a REAR part, then fix with M2x5(or M2x6) screws threw whole parts(Route cables along the groove of parts).
- Tight a camera part(build on 7) and a FOOT part with VOLUMES through an ARM part.