1 / 5
Raspberry Pi Camera case with DAISO lens mount
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Raspberry Pi Camera case which is able to mount the smartphone lens sold by DAISO, and the NeoPixel(WS2812B).
- Rating
- 0 / 5
- Likes
- 7
- Downloads
- 47
- Makes
- 0
- Views
- 674
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Noncommercial
What's this?
Raspberry Pi Camera case which is able to mount the smartphone lens sold by DAISO, and the NeoPixel(WS2812B). And also this has 2 hinges for changing angular.
But, yes. I know. A NeoPixel in this model is not work enough to use in perfect dark situation as a light(If you wanna use this as a light too, Please check pictures before build this).
BOM
- DAISO Smartphone lens set x1
- Raspberry Pi Camera V2 x1
- NeoPixel WS2812B x1
- Cable for NeoPixel(AWG26 or AWG28)
- M2 insert nut(L3.0 or L4.0 x D3.5) x4
- M2x5 or M2x6 screw x4
- M2x8 screw x2
- M2 nut x2
- Printed parts(VOLUME needed 2 pcs)
How to assemble
- Put insert nuts into a FRONT part with the soldering iron.
- Put screws into both of VOLUMES with the soldering iron(Don't burn yourself!!).
- Put nut in a slit on a REAR part(It may be a little tight. Use thin tools).
- Put nut in a hole on a FOOT part.
- Solder cables to a NeoPixel(VDD, VSS and DIN).
- Put a NeoPixel into a FRONT part.
- Sandwich the Raspberry Pi Camera between a FRONT part and a REAR part, then fix with M2x5(or M2x6) screws threw whole parts(Route cables along the groove of parts).
- Tight a camera part(build on 7) and a FOOT part with VOLUMES through an ARM part.