Boron - Light cube for logo display
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Boron (Box-Voron) is an open-source light cube. Display your logo on a structure very similar to Voron printers!
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 7
- Wydruki
- 0
- Wyświetlenia
- 202
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Voron Parts & Upgrades
- Licencja
- GNU General Public License v3.0
Boron (Box-Voron) is an open-source light cube that can be built for relatively cheap. The sides graphics are interchangeable and allow for quick reconfiguration by unscrewing the top of the frame. It allows us to display a large logo on a structure very similar to Voron printers.
The design is built so that minimal electronics and soldering work is required. A 10-meter LED strip is cut into 4 equal sections and is wrapped around the cube's guide channels. Each strip's end arrives at the top of the cube, where it transitions to the top face. The electronics operate at 24V to allow the Shelly controller to switch more power for the same current.
The bottom of the cube contains two output wall sockets to aid with wiring. (Maybe chain more Borons?).
A complete build guide, including sourcing tips and step-by-step construction manual can be found on our wiki page. CAD files, STL files and firmware can be found in the Github repository.