SIMPLE HOOK AND RAIL (WITH TIMBER RAIL)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is an extremely simple print and an extremely simple wood project but it does need some basic skill and tools.
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 18
- Wydruki
- 0
- Wyświetlenia
- 242
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
NOTE if you would like a similar system with a printed rail - click HERE.
I made this rail one day when I was in a bit of a hurry, to make a place to hang all my woodworking templates. I had a metre and a half old bullnosed architrave getting in the way, so ran a quick router groove down the back of it and madly started printing hooks.
The hooks seem ridiculously slender, and I have kept them to 12mm (.5 inch) wide, but they do hold quite bulky templates from time to time.
I printed mine out of PLA with three perimeters and only 15% infill and have not had a break in well over a year of use.
If you wish to build a rail like this - the sketch below will give a rough idea of the shape - I'd recommend printing a hook first just to check clearances before you do a batch of fifty! 