SIMPLE HOOK AND RAIL (WITH TIMBER RAIL)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is an extremely simple print and an extremely simple wood project but it does need some basic skill and tools.
- Rating
- 0 / 5
- Likes
- 6
- Downloads
- 18
- Makes
- 0
- Views
- 242
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
NOTE if you would like a similar system with a printed rail - click HERE.
I made this rail one day when I was in a bit of a hurry, to make a place to hang all my woodworking templates. I had a metre and a half old bullnosed architrave getting in the way, so ran a quick router groove down the back of it and madly started printing hooks.
The hooks seem ridiculously slender, and I have kept them to 12mm (.5 inch) wide, but they do hold quite bulky templates from time to time.
I printed mine out of PLA with three perimeters and only 15% infill and have not had a break in well over a year of use.
If you wish to build a rail like this - the sketch below will give a rough idea of the shape - I'd recommend printing a hook first just to check clearances before you do a batch of fifty! 