Replacement Screw for Somfy Evolvia Motor Cover
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Replacement screw for Somfy motor covers (ref. 2509050).
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 21
- Wydruki
- 1
- Wyświetlenia
- 61
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This screw is designed to replace the original plastic screw used on the Somfy Evolvia swing gate motor cover.
It corresponds to the screws found in Somfy spare part reference 2509050, which originally includes 2 screws and 2 O-rings (10 mm inner diameter).
This official spare part appears to be no longer in stock, making this 3D-printed replacement especially useful — at least for me! :)
Recommended print settings
- Layer height: 0.2 mm
- Walls: 3 perimeters
- Infill: 20%
- Material: PETG or ASA
- Supports: Useful only on the build plate
Notes
You must reuse the original O-ring or install a standard 10 mm inner-diameter O-ring to ensure proper sealing.
A matching unlocking/locking key for this screw (and the motor) is also available here: “Somfy Motor/ Cover Locking Key” — feel free to check it out if you need the tool as well.