1 / 4
Low Profile Feed For Vizio D24F
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Living Room
- Licencja
- Creative Commons — Attribution — Noncommercial
I needed low profile feet for fitting the TV in a kitchen cabinet. I'm not sure if this will fit other Vizio TVs, but it might. I made some additional mounting holes in the feet for screwing down, as there is no support to keep it from tipping forward. There is a spacer to fill the void in the foot mounting hole, and there is the foot itself. I printed it in ASA at 0.25 mm layer height, but the TV is very light, and I think PETG or PLA+ should also be acceptable. The screw holes from the bottom may require support if your printer or filament struggles in bridging.