Low Profile Feed For Vizio D24F
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Feet to Lower Vizio D24F a few inches With Mounting Holes
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 8
- Makes
- 0
- Views
- 65
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Living Room
- License
- Creative Commons — Attribution — Noncommercial
I needed low profile feet for fitting the TV in a kitchen cabinet. I'm not sure if this will fit other Vizio TVs, but it might. I made some additional mounting holes in the feet for screwing down, as there is no support to keep it from tipping forward. There is a spacer to fill the void in the foot mounting hole, and there is the foot itself. I printed it in ASA at 0.25 mm layer height, but the TV is very light, and I think PETG or PLA+ should also be acceptable. The screw holes from the bottom may require support if your printer or filament struggles in bridging.