270 Hinge Combined with Cover and Base Plate Holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Glass cover holder with 3 base plate holder combined with the 270 degree hinge.
- Ocena
- 4,5 / 5
- Polubienia
- 15
- Pobrania
- 121
- Wydruki
- 3
- Wyświetlenia
- 515
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Follow the instructions on the 270 hinge page to install the 270 hinge. It installs the same way. Just that now it has cover and base plate holders on it.
For the left cover holder, just unscrew the proper screws and then screw the holder onto the machine.
I've included all of the stl files from all the various people including the small parts so you don't have to try and figure out what you need from each. These files are complete. The small nut block can be used if your door doesn't fit into the machine with the regular one.
If your Centauri is relatively new, then you have rubber washers on the door. You don't need the spacer if you have the rubber washers. If not, use the spacers.
I printed these using PLA 0.2 layer height with tree support.