1012 modeli
Required Stls: 1x hinge_upper 1x hinge_lower 1x arm_upper 1x arm_lower 2x nut_block *4x plastic_spacer *The plastic spacers go in the glass cutouts to align the panel and prevent the metal screw from touching the glass. Required Hardware:…
[5 Dec 2023 short update] Known Issues: A.) This is designed for K1, I don't own K1 max, not sure if it will fit, there are K1 max version 270 hinges done by others also available on Printables. B.) PLA will work, but recommend PETG or…
Mount for a Logitech C270 webcam for the Prusa i3 MK3. Great for monitoring prints and creating time-lapses. This will require the removal of the original webcam base, which can be achieved by removing the foam end caps, exposing a screw.…
I CANNOT SAY THIS ANY SIMPLER. I'M WRITING THIS IN UPPER CASE SO THAT WHEN SOMEBODY SAYS ‘I DON’T UNDERSTAND WHAT I NEED TO PRINT' I CAN SAY IT'S ALL IN THE INFORMATION PAGE. AT A BARE MIMIMUM, EVEN IF YOU DON'T READ ANY OF THE MAIN TEXT,…
Turn the underside of any table into storage. Screw in a rail, slide in a drawer. MODULITH rails mount under a desk, shelf or enclosure table with a few wood screws. Cases slide on and QuickLock holds them, so you can swap or rearrange…
I found this focus wheel at https://www.thingiverse.com/thing:714475 , but it was 11.1mm thick and it made my camera look like a toy so I created a much slimmer one. My final design comes in at 4.4mm so it is much more compact and works…
This is a simple mounting bracket to attach a Logitech C270 to the Ender 3 X-gantry. It holds the camera at a good angle towards the bed and printing head, with the tilt being adjustable. The camera and bracket itself are attached using a…
Creality K1 Max 270° Door Hinges With Door Latch. My first attempt at a remix so any feedback is appreciated. For print tips, follow original.
Just a remixed mount piece for the Logitech c270 webcam. I had already removed the mount plate from my webcam for a previous mount so this lets you just screw that into this piece. (it is/was a bit of a mess around to get the screw in,…
I've been waiting for a 270° Door Hinge for the K1 Max since I first scared myself that it would shatter if swung to far. The factory design has the screws run right into the frame if opened more than 90°. Metal screws against glass with…
I use this for my 3D printer enclosures - sometimes you want to open the door and get it out of the way. The mounting holes are for “6 gauge” or 4mm countersunk screws, the pivot is M4x30 cap screw (if you get a longer one with an…
need 4x m3 insert nut
Version 2 is now available for download! Version 2 features a sturdier mounting system that clips in place, no more worries about your webcam falling off the printer! This version also slightly moves the camera back so it has more space…
Adapter plates for allowing K1C and later releases of the K1 to use my 270 degree hinges. ----------------------------------------------------------------------------------------------------------------- These two (small) side panel hinge…
I have taken ALL of the work out of mounting your Logitech C270 to your Ender 3 V3 SE X-axis. You don't need to do ANYTHING other than have this camera (or camera with similar mount), and this Ender, then just print. No hardware? No…
This is my cover replacement for Logitech C270 Webcam. All you need to do is disassembly the original webcam and remove PCB electronics board. The board is fixed in the new housing using the original screws. Pros Click-clack system. No…
Keyboard feet for logitech k270 Printed in PLA
Note: Does NOT work on the K1 Max. Design Summary: The Creality K1 is an excellent printer, but Creality's choice of door hinges is questionable. A partially opened glass door simply seems like an accident waiting to happen. I looked at…
This is a remix of the right hinge from MagicShrimp's 270 degree hinge for the Elegoo Carbon Centauri. It is literally a mash of the hinge and the right holder from Julien Mairy's cover and bed holder. I wanted to have both, but they…
Modification to adjust the Focus on a Logitec C270 Webcam. Be aware that if you open the Camera the Focus Ring is glued into place. You can Remove this glue with a small Screw driver. Additionaly you will need 2x M3x8mm Screws to mount…
The camera is angled down by 3 degrees. To use this you need a 15mm or so M3 bolt, and a couple of M5x8 bolts and T slot nuts. Remove the monitor bracket from the camera, the mount then fits in place of the monitor bracket. Note the…
Corner covers: Cover up the gap left from removing the hinges for a better chamber seal. No additional hardware required, just reuse the screws used to hold the original hinges in place. Magnetic Door Latch: Uses 2 8x3mm magnets to hold…
If You find this design useful, Please consider sharing a Make or leaving a comment. It's always good to see my efforts in use by others out there and it often inspires me to make improvements where I can. Without feedback I just draw a…
Uses a M3x25 instead of the default pin. You'll also need a M5x16 + nut and 2xM5x10 + 2x extrusion nuts Mounted in the rear right corner for the highest distance possible
A simple tripod mount for the Logitech C270 webcam. With so many churches needing to stream services because of the COVID-19 lockdowns, and a shortage of webcams, I hope this will help someone deploy their old C270 - a decent camera,…
I modeled a top glass holder onto the lower hinge of the door mod by MagicShrimp. This allows both the door hinge mod as well as a top glass holder on the printer since both were not able to be used at the same time. The rest of the…
TLDR:- New Hinge design (V3) allows for quick change V3 face plates/covers while Using V2 additional V2 components for the hinge assembly. New optional tools added. Also includes post processing and detailed assembly instructions (with…
Having a 3D printer without a camera is like driving at night without lights. I decided to create a base that doesn't require any alteration to the MK4 and can also serve as a starting point for others to create their own camera support.…
MOUNT GEN2 UNDER ANY TABLE OR DESK GEN2 Under Table Rails turn the dead space under any desk, table, or shelf into slide-and-lock drawer storage. Screw the rail up once, then slide GEN2 cases in and rearrange your whole setup in seconds…
This is a spacer for the 270 degree hinge below. I felt the gap between the door and printer was too large so I made a small space. Original here:…
Eine Webcam Befestigung für die Logitech C270 Webcam. Es wird keine weitere Schraube benötigt! Erstellt für https://www.printables.com/de/model/3407-articulating-raspberry-pi-camera-mount-for-prusa-m Die auf den Bildern verwendete…
GEN2 270 TABLETOP STARTER KIT The easiest way to start the GEN2 QuickLock Modular System on any surface. 270 is the LARGE depth (about 256 mm inside), sized for long tools, cordless kits and big spools. GEN2 was originally built to mount…
This model is compatible with the lego system.
Hey, this is a remix of KYZ-Design's amazing model. It's a Door Hinge which allows you to open a door (for example of an enclosure) 270 Degree. The door hinge consists of 2 Parts. Both of them have counterbores (according to DIN 974-1)…
The faceplate in Night Gryphon's Logitech c270 webcam manual focus adjust ring is perfect, but the lenses on newer C270s have a slightly smaller diameter than old ones. As a result, the focus ring doesn't fit. I adjusted the inside…
Logitech C270 mount for KOBRA 2 PRO/PLUS/MAX Updating Kobra 2 pro/plus/max to versions above 3.0.5 , it is possible to connect a USB camera and watch the printing process using Anycubic app . I found my old camera and created a mount for…
Mon frere m'a fait un cadeau. Sa vieille webcam. J'ai donc dessiné une couverture. Vive la paranoïa. Comme toujours j'ai ajouté les fichiers STEP pour votres propres modifications. Print instructions Rafts: Yes Supports: Yes Resolution:…
The 270 degree hinges these new pins were designed for are here :- 270 Degree Geared Hinges for K1/K1 Max/K1C. Update November 1st 2024:- added some fatter link/connectors. Originals (by design) were thinner to allow the pins to be seen…
The original hinge (this is a remix) is nice looking but it did not allow for 270 degrees of movement and I could not re-inforce the core with metal, to make very stiff. Also it was very big and I wanted it a bit smaller to fit M3 allen…
Pick a drawer, then make it yours. The front is up to you. Decor drawers take swappable faceplates and handles, so you can change the look anytime without reprinting the drawer. Print the body in budget filament and save the fancy stuff…
Hi, this is Robocat 270 quadcopter keychain, i made it to look like a real one ;), i hope u will like it. There are two versions, the one with antena have a hole where you can put a piece of 1,75mm filament to imitate antena, second one…
📌 Creality K1C 270 Dgree Hinges (no Gap Filler) This model is a remix of TianZi's work from Printables. Thank you for sharing such a great model. Original and installation guide:…
VORON - C270 Holder For mounting bottom side gantry → C270_holder.stl or for mounting on the frame → C270_holder_large.stl BOM: 2x M3 Threaded Insert 1x M3x8 1x M3x20 Remix: https://www.thingiverse.com/thing:4742899
2nd variation of my original twisted planter. This time the planter is 270 degrees twisted compared to the original 60 degrees. A 3D planter with an integrated water reservoir. So that the planter can store acces water when you give the…
Die montage an der rechten seite der X-Achse führt zu einem guten blick auf die Düse. Mounting on the right side of the X-axis results in a good view on the nozzle.
The original hinge pin from the camera can reused, no additional screw and nut needed. This position comes with a unobstructed view of the nozzle. Remix from: https://www.thingiverse.com/thing:5467406 Thx to Sławomir Pietrzakslawix
MISE À JOUR 24.08.2023 : Fixation C270 Création de 2 fichiers supplémentaires Fixation C270 miroir.stl Fixation C270 cable miroir.stl 02.07.2023 : Couvercle C270 v2 Modification de l'emplacement du logo Voron Mise à jour Angrycam C270.stp…
If You find this design useful, Please consider sharing a Make or leaving a comment. It's always good to see my efforts in use by others out there and it often inspires me to make improvements where I can. Without feedback I just draw a…
You need an M3x45 screw and an M3 nut to assemble the hinge. Fasten the hinge with M4 screws. -------------- Do montażu zawiasu potrzebna jest śruba M3x45 i nakrętka M3. Przykręć zawias śrubami M4.
Logitech C270 webcam mount for an Sovol SV-06. Perfect for monitoring and Octoprint time-lapses. This is a remix of the mount from In3DSpace : https://www.printables.com/model/3991-logitech-c270-mount-prusa-i3-mk3 Print instructions: 0.2…
A simple Webcam holder with a arm for a Logitech C270 Webcam. Works with Original Prusa Mini, i3 MK3, MK4 and similar printers with standard aluminum extrusion profiles. You can Mix&Match the different arms, but i suggest to use the parts…
After trying different ways to mount my Logitech c920 onto my Ender 3, I decided I wanted a way to mount the camera off the bed or Y axis. I came across @SCHEMENKE's design for an iPhone mount and thought it was a brilliant design. So,…
Recreation of the left x axis cover with mounting point for a Logitech C270. Had to raise the height of the cover to get enough clearance for the cam. The screw from underneath is a bit fiddly to get in, but it works. I've included the…
NEW VERSION: MODULITH 270 GRIDFINITY DECOR DRAWERS These drawers have been redesigned and re-released as part of MODULITH (formerly GEN2). The new page has 12 sizes (1W to 4W in 1H, 1.5H and 2H), a half-grid side channel, optional magnet…
Just used 2 things to build a portable Logitech C270 webcam tripod and added a base. The base should be printed with 3 walls, support and bridge enabled. The empty space in the base should be filled with some metal (I used lead) to give…
This is a Remix of the original to add support for the commonly used logitech c270 webcam. For installation Instructions see Remix list - Chirimorin original mount. There is a 4 Pro specific version included. (jul22,2024) removed untested…
Mount for Logitech C270 webcam. Should fit Elegoo Neptune 4 and 4 Pro.
This is a wall mount specifically designed for the Logitech C270 webcam (with the base removed), a replacement faceplate, and a focus ring to adjust the focus on the fly. The faceplate and focus ring are a remix for my specific use case.…
I have a cabinet over the top of my printer and couldn't get the top glass in the original due to clearance.
I remixed the original version of @RIBsfit's design to correct most of issues that reported by @Mordiev. 2 M3x8mm and 2 M3x16mm screws are still needed to tight the hinges to into the frame. The backplate is not neededed but 4 M3 x H6mm x…
Any questions? Hit me up on the Voron Discord! @Alexander Þór This design is based on chrisgonzales already incredible 270 degree hinges. The main goal of this remix was to have the front panels mount in a way that didn't use any VHB tape…
This is a minimalist single doser container with a plain dust cap. I don't want to hold n*hundred grams of coffee beans in the grinder so the original Baratza container was a bit overkill for me. That's why I have designed this minimalist…
logitech c270 webcam mount vslot 2020
After building a Voron v0.2 I wanted to be able to easily remove the front panels on my v2.4 as well but still liked the design of my current hinges made by chrisrgonzales (see Remixes links below). Now the top/panel parts can be slid off…
Scaled up nexty's 18650 battery spacer to accommodate 32650 battery size. I need just a few spacers for my LiFePo4 12v pack so it make more sense (and faster) to print it than buying on ebay. The dimension of this spacer is: 35.8mm x…
I made remix of Logitech C270 webcam cover made by user Pomi. I wanted to use screws to secure the lid to the base and I also made some adjustments to clearances. You will need 2pcs of M3x8mm or M3x10mm screws for the lid. STEP files…
All available mounts for the C270 webcam somehow did not fit, interfered with something or where just too big, so I made my own. You'll need 3 M3x20 screws and nuts to assemble - because everybody who owns a 3D printer has those, right?…
Inspired by a model I bought but which I was not happy with, as it required a ton of supports and could only rotate, not tilt. This model can tilt up and down and rotate. The tilt automatically locks in the up position and a small plunger…
Took the camera mount piece from luc.e tripod mount to make it work with the inner framing of the Qidi X Max 3. Simply slides onto the L bracing. No supports needed and I was unable to get the tiny screw back in the pivot post but its a…
In honour of Pokemon Go's Lotad Limited Research Day (March 30th) I have knocked up a Lotad one piece model Need supports for its big floppy head! Print instructions Category: Creatures
Modded original v0 hinges to allow it to open 270°
this is a door latch for creality k1 270 degree hinge upgrade to keep and hold the door open.
The hinge pins can also be removed from the area of an allen key.
The Arm and Bracket parts slide together after clipping them onto the extrusions. See photos. The C270 camera mount tilts and swivels to provide complete control over camera placement. I have provided 6 different camera mount positions…
Mount for Logitech C270 webcam in Prusa's IKEA Lack Enclosure. Fits on top of the top left leg mount in the front of the enclosure. Fusion 360 file: https://a360.co/2Jmy5bT Print instructions Category: 3D Printer Accessories
Needed a replacement leg for a keyboard. Easy design and print. I've included an .stl and .f3d.
These are my offering for upgrading the classic Revell 1:2700 scale Star Destroyer. I've used some artistic license in places - adding in detail where there wasn't too much on offer. These were done for a Resin printer - mine is Anycubic…
Update November 1st 2024:- added some fatter link/connectors. Originals (by design) were thinner to allow the pins to be seen and also guarantee no sanding/post processing would be needed with an out of spec print. Newer fat links are…
Print it, pull it off the bed, slide it in. One piece, zero assembly. Classic drawers print in one go with the handle built right into the front. No faceplates, no screws, no clips. Pop it off the plate and it is ready to go to work.…
Wieża temperatur dla ASA 230-270 i PETG 215-250
Corner mount for Ender 5 S1 Hardware: 1x C270 1x C270 Pin (extracted from old mount, check youtube on how to remove it) 4x M4x25mm (30mm in Picture) 4x M4 Nut 1x M3x10mm 1x M3 Insert Print: 1x Spacer 1x Body (Base Plate) 1x Arm Holder 2x…
Scharnier Tür RatRig V-Core 270° - Hinge Das Scharnier passt an die “originale” Tür vom RatRig V-Core 3.1. Dort sind sonst rechts und links Griffe und Magneten zum halten. Aber erstens hat man somit nie eine Hand frei und weiß auch immer…
This takes the bottom right piece of the “Cover and Bed Holder” by Julien Mairy and merges it with the bottom “270 Degree Hinge” by MagicShrimp . All credit goes to the original designers of those models. I just aligned the parts and…
These remixes are based on these three things: Logitech C270 tripod, by luc_e, December 27, 2015 C270 Focus Ring - OpenSCAD included, by biomushroom, August 24, 2016 snapmaker base plate, by Okatake, February 12, 2018 (Note: I tried to…
Logitech C270 Qidi X-max 3 camera bracket. New rounded model, for placement in the furthest corner. **Add model V4 with 2 mm less height It allows to place it in the corner where it does not disturb, and the angle and the distance is…
The original model had files called "arm_upper" and "arm_lower". These arms were too short for my newer version of the printer and would hit onto the edges of the printer opening when I went to close the door. I had to push the door into…
Logitech Keyboard Replacement Feet / Leg Logitech: K260 K270 K270r MK260 MK270 MK270r
I updated CO-OCD's great design for the Logitech C270 by adding threads and air vents. After I started printing polycarbonate in my enclosure at around 38C ambient my entire C270 setup started warping. See the last 2 photos for the…
Larger. Stronger. Easier to get stuff out of
Inspired by the many X-Motor C270 mounts that can be found on Printables. I decided to make my version for the MK4. Using the MK4 printable parts download I was able to use the “X-END-Motor” part to make a perfect fit for a Logitech C270…
This is a mount for the logitech C270 camera to the post of a lack enclosure.
This is a set of models that go together, firstly a remix of the very nice C270 cover replacement with focus knob from Pomi. The front was modified slightly to fit better and the bottom mount was moved to the rear. The mount base was…
A model of the feet used on the Logitech K270 keyboards, easily printable without supports.
Simple mount for the Logitech C270. Made so you can use the cam as-is without disassembly, tools or anything. Just slide it on the printer, then slide the cam into the mount → Done.. I printed it with the cheapest left-over PLA I had…
This is a remix of @MagicShrimp_2948053 and @JulienMairy. It combines the lower 270 door hinge with the bed, cover, and tool holder. These both share the same mounting holes, so I just combined them. I am new to blender so I included the…
Bought a board without a io shield so io made one. Made after a Z270-A, but after searching it should fit the Z370-A and the Z370-A II, dont know if there are any other. I tested it on the Z270 and works like a charm. Watchout at the…
This is an original accessory part for the Elegoo Centauri Carbon 3D printer. It is designed to fill the gaps at the top and bottom of the door that appear when using the following 270° hinge mod: 👉 270 Degree Hinge for Elegoo Centauri…
Mixed from 2 different on my Neptune 4 not fitting models. I have also redesigned the arm for a better view.
Slide privacy cover for Logitech C270 webcam Print Settings Notes: Print cover upside down - track facing up. Print slider right side up - front sticking up. Rafts: No Supports: No Resolution: 0.2 Infill: 25% Assembly Place cover on…
This is a remix of KYZ's Hinge. I made the counterpart of the hinge look like the same as the main part so in my eyes the whole looks a little bit cleaner and equal on both sides. I also changed the pivot to M3 screw and optionally you…
