Voron 2.4 270° Front Panel Hinge - Removable
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Hinges that have 270° of swivel and can be removed by pulling them up v0-style.
- Ocena
- 5 / 5
- Polubienia
- 89
- Pobrania
- 457
- Wydruki
- 7
- Wyświetlenia
- 2298
- Oceny
- 7
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Voron Parts & Upgrades
- Licencja
- GNU General Public License v3.0
After building a Voron v0.2 I wanted to be able to easily remove the front panels on my v2.4 as well but still liked the design of my current hinges made by chrisrgonzales (see Remixes links below).
Now the top/panel parts can be slid off the hinges by just pulling them up, since the screw is retained by the bottom/frame mount. These are still meant to be attached to the panels with VHB tape and I've kept the larger surface area of the original screw-in versions to improve adhesion.
You can reuse the original M3x40 screws for both pieces or opt to use a single M3x30 screw for one of them: this way you'll have an easier time aligning the panels when reinserting them. Insert the screws from the bottom in the frame-side mount.