Hansgrohe Bath Outlet Silencer
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A 3d printed part that attaches to the outlet to reduce noise when filling bathtub
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 5
- Wydruki
- 0
- Wyświetlenia
- 33
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bathroom
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This bathtub outlet silencer is designed to noticeably reduce the noise that occurs when filling a bath. By redirecting the water so that it flows onto the wall of the tub instead of falling directly into the already rising pool of water, the attachment achieves an approximate reduction of 10 to 20 dB, creating a much quieter and more comfortable environment while the bath is filling.
The original outlet includes an adjustable flow nozzle, but in my specific bathtub the built-in adjustment was not sufficient to change the angle enough to reduce noise effectively. For that reason I designed this attachment to give the water a more suitable direction. Because every bathtub shape is different, this solution may not work the same way for everyone, and the level of noise reduction can vary depending on the tub’s geometry.
This attachment simply redirects the water without altering the plumbing and provides a practical way to improve the acoustic comfort of bath-filling in setups similar to mine.
Happy printing!