Mononoke Hueforge - 4 Color Art Panel
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This Hueforge panel is printed at a very high resolution to capture the intricate line work and layered shading.
- Ocena
- 0 / 5
- Polubienia
- 1
- Wydruki
- 0
- Wyświetlenia
- 47
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Wall-mounted
Print Profile (Only the Settings You Need to Change)
- Layer Height: 0.08 mm
- Base / First Layer Height: 0.16 mm
- Infill: 100%
- Slicing Gap Closing Radius: 0
- Prime Tower: Disabled
- Detect Narrow Internal Solid Infill: Off
- Ensure Vertical Shell Thickness: Partial
Swap colors at the listed layers and you're good to go.
Begin with Black
At layer 8 swap to Dark Gray
At layer 17 swap to Light Grey
At layer 22 swap to White and continue to the end of the print
This swap sequence matches the slicer data shown in the screenshots and matches the final printed result visible in the photos.
This Hueforge panel is printed at a very high resolution to capture the intricate line work and layered shading of the artwork. The final result closely matches the preview and produces a clean gradient transition between black, dark gray, light grey, and white.
The finished print you see in the photos was produced using BambuLab PLA colors with a size of 200 by 150 millimeters.
Your printer will recreate the same crisp detail shown in the slicer previews and the printed sample images.