3D printer partial enclosure for draught reduction
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
You will need to purchase or cut to size 8mm thick panels and purchase suitable magnets. I bought the following for use in this project:
4x 8mm thick clear acrylic panels - cut to size 600mm x 600mm from eBay (cheaper sources exist elsewhere) - https://www.ebay.co.uk/itm/234499069562
8x 22mm dia x 6mm high Rubber Coated Cable Holding Magnet With 7.9mm Cable Clip - 4.3kg Pull
Code: CCCT2267M4-BK-1 - https://www.first4magnets.com/product/22mm-dia-x-6mm-high-rubber-coated-cable-holding-magnet-with-79mm-cable-clip-43kg-pull-121468?variant=1144
8x 22mm dia x 6mm high Rubber Coated POS Magnet c/w M4 Boss Thread - 5kg Pull
Code: NPL22M406(BK)-1 / NPL22M406(W)-1 - https://www.first4magnets.com/product/22mm-dia-x-6mm-high-rubber-coated-pos-magnet-c-w-m4-boss-thread-5kg-pull-21126
8x 20-25mm M4 bolts
8x 12-15mm M4 bolts
8x M4 nuts
24x M4 penny washers - https://www.amazon.co.uk/dp/B099PF4HV2
You will need to pause your print halfway through in order to insert a captured magnet inside the bracket.