3D printer partial enclosure for draught reduction
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Detachable clear acrylic 8mm thick 500mm x 500mm four-panel enclosure (no top).
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 9
- Makes
- 0
- Views
- 88
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
You will need to purchase or cut to size 8mm thick panels and purchase suitable magnets. I bought the following for use in this project:
4x 8mm thick clear acrylic panels - cut to size 600mm x 600mm from eBay (cheaper sources exist elsewhere) - https://www.ebay.co.uk/itm/234499069562
8x 22mm dia x 6mm high Rubber Coated Cable Holding Magnet With 7.9mm Cable Clip - 4.3kg Pull
Code: CCCT2267M4-BK-1 - https://www.first4magnets.com/product/22mm-dia-x-6mm-high-rubber-coated-cable-holding-magnet-with-79mm-cable-clip-43kg-pull-121468?variant=1144
8x 22mm dia x 6mm high Rubber Coated POS Magnet c/w M4 Boss Thread - 5kg Pull
Code: NPL22M406(BK)-1 / NPL22M406(W)-1 - https://www.first4magnets.com/product/22mm-dia-x-6mm-high-rubber-coated-pos-magnet-c-w-m4-boss-thread-5kg-pull-21126
8x 20-25mm M4 bolts
8x 12-15mm M4 bolts
8x M4 nuts
24x M4 penny washers - https://www.amazon.co.uk/dp/B099PF4HV2
You will need to pause your print halfway through in order to insert a captured magnet inside the bracket.