ESP32 Ultimate Enclosure (ESP32-wroom-32U)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
The ultimate enclosure for ESP32-wroom-32U.
- Ocena
- 5 / 5
- Polubienia
- 45
- Pobrania
- 232
- Wydruki
- 2
- Wyświetlenia
- 921
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Standard Digital File License
ESP32-wroom-32U is a perfect ESP e.g. for ESPresense. However, to my surprise, I wasn't able to find any normal enclosure for it, so, here you go...
My model has 2 fixing options:
You can print out provided wall mount - this way you can still use all GPIO's, even when mounted.
Or you can drill through base via marked positions - this way you cannot use GPIO's.
For both methods, use flange-head screw, NOT countersink.
Follow the video manual below, i.e. it shows you how to properly hide the antenna cable.
If I’ve been able to help you, and you feel like giving back, a coffee would not only make my day, but also remind me that the effort is valued, and worth sharing.
☕ Buy me a coffee
→ Detailed VIDEO manual on YouTube←
↓(for some reason, direct embedding is not working as of now (03/12/2025). If the video below is not displaying, use the link above)
NOTES:
Optimized for .6 nozzle (to save time), however, .4 should have no troubles at all, .8 should be fine too (haven't tried yet).
If you encounter any issues, please, let me know.
Please, understand, that every 3D printer is unique. I left some clearances, so the base (main part) should fit without any difficulties. Based on your feedback, I might provide a few options for lid (with various clearances). However, you can always try scaling/negative part in your slicer.
If you'd want some variants, e.g. lid without notch, or whatever - just give me a shout here.
Enjoy!