1 / 6
ESP32 Ultimate Enclosure (ESP32-wroom-32U) — image 1
1 / 6

ESP32 Ultimate Enclosure (ESP32-wroom-32U)

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

The ultimate enclosure for ESP32-wroom-32U.

Rating
5 / 5
Likes
45
Downloads
232
Makes
2
Views
921
Reviews
2

Updated at source:

Model information

Category
Electronics
License
Standard Digital File License

ESP32-wroom-32U is a perfect ESP e.g. for ESPresense. However, to my surprise, I wasn't able to find any normal enclosure for it, so, here you go...

My model has 2 fixing options:

  •  You can print out provided wall mount - this way you can still use all GPIO's, even when mounted.

  • Or you can drill through base via marked positions - this way you cannot use GPIO's.

    For both methods, use flange-head screw, NOT countersink.

Follow the video manual below, i.e. it shows you how to properly hide the antenna cable.


If I’ve been able to help you, and you feel like giving back, a coffee would not only make my day, but also remind me that the effort is valued, and worth sharing.

☕ Buy me a coffee


→ Detailed VIDEO manual on YouTube←


↓(for some reason, direct embedding is not working as of now (03/12/2025). If the video below is not displaying, use the link above)

NOTES:

  • Optimized for .6 nozzle (to save time), however, .4 should have no troubles at all, .8 should be fine too (haven't tried yet).

  • If you encounter any issues, please, let me know.

  • Please, understand, that every 3D printer is unique. I left some clearances, so the base (main part) should fit without any difficulties. Based on your feedback, I might provide a few options for lid (with various clearances). However, you can always try scaling/negative part in your slicer.

  • If you'd want some variants, e.g. lid without notch, or whatever - just give me a shout here.

Enjoy!

Tags