PG29 Blind Stuffing + Nut and TPU-Sealing / PG29 Blindstopfen + Mutter und TPU-Dichtung
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
PG29 blind stuffing to close unused openings for PG29 cable glands in housings (ca 37.0mm). Plus optional TPU-sealing.
- Ocena
- 5 / 5
- Polubienia
- 20
- Pobrania
- 110
- Wydruki
- 0
- Wyświetlenia
- 219
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial
PG29 threaded blind stuffing to close unused PG29-openings in housings.
[1] Thread type:
PG thread
[2] Diameters for PG29 opening:
a) threaded hole: 35.5mm / PG thread
b) drill hole without thread: 37.0mm
[3] Sealing:
An optional TPU-sealing model file is available.
Print
Material: PETG (blind stuffing, nut), TPU 95A (sealing)
Supports: not required
Brim: not required
Serial printing (part by part) for better thread quality.
Assembly
Place blind stuffing in PG29 opening and secure with PG29 nut.
Optionally place sealing on stuffing before assembly.
Use a 1€ coin for turning of the blind stuffing.
Hint:
Apply some silicone grease on the thread, so it can be easily be assembled and disassembled.
(Without grease, the thread tends to wind on and off somewhat “sticky”.)