5252 modeli
Printable parts for the MK2/MK2S/MK2.5 to MK2.5S Upgrade. Note this is a legacy download. As MK2.5S is an upgrade for the older MK2, MK2S or MK2.5 printer, other parts not listed in this print are available as the MK2S parts:…
Spell Templates to measure distance and Area of Effect for Tabletop Games like Dungeons and Dragons or Pathfinder. The template makes it easy to see which monsters/players get hit by an AoE Spell. No more counting squares or moving minis!…
THIS DESIGN HAS BEEN STOLEN AND SOLD ON EBAY, AliExpress, Bangood etc.! PLEASE DO NOT SUPPORT SUCH SELLERS ! Once my Y-Axis Upgrade ( https://www.prusaprinters.org/prints/5620-prusa-mk3-mk3s-y-axis-linear-rail-guide-upgrade ) works great…
Printable parts for the MK2 / MK2S to MK2.5 upgrade. Note, these are the parts for the MK2.5 upgrade, not the newer MK2.5S upgrade.
Original Prusa MK2S to MK3S Upgrade printable parts. Note, this is a legacy download. This is the upgrade to MK3S, not the newer MK3S+.
NOTE: This light bar was made after receiving requests from users to adapt my standard Prusa frame light bar. I do not own a Bear Upgrade printer, so I had to rely on other users to test it for me. Please leave a comment or message me if…
These models were created using Fusion 360. These models Allow you to add extra tobacco and tubes with the Powermatic 5+ Powermatic machine will need to be opened up and modified so you can keep tobacco door open while using the machine.…
With my Prusa Mini followed a simple filament spool holder that needed adjustment when using a spool with different width. My solution is a new simple and compact small spool holder, easy to bring with you and not needing adjustments for…
Stock, the oculus quest does not fit me very well. If I pull the band low enough to keep it from slipping off, there is a huge gap at the bottom of the headset. This allows me to have a very good fit with no gaps and keeps the headset…
LPG Filler Cap for a hatch with a hole diameter of 44 mm. I can make a model for any size. Write in the comments. Thread M10 x 1.5. After printing, you can walk the die along the thread.
Spell AoE (Area of Effect) Damage Marker for Tabletop RPG Games on a Standard Square Grid. This Model includes multiple areas in one object, so you don't have to carry 5 to 8 AoE-Markers around. It has also different heights for different…
Revision 2 Viele nutzen bereits die Vorgängerversion . Ich selbst nutze Sie seit 2 Jahren kontinuierlich. In meiner aus ASA gedruckten Version konnte ich nun auf der Innenseite feinste Risse erkennen, die Stabilität scheint noch nicht…
A modification of jmbinette's ECM Synchronika Drain Pan upgrade ( link ), which is itself a major upgrade of the drain pan provided by ECM. This variation is sized slightly smaller in the corners to make it printable on a Prusa Mini, and…
These are fastener adapters. Use them for prototyping before buying specialized fasteners or use them permanently! The models are sized for a SAE ¼ inch - 20 threads per inch nut and bolt (¼-20). This leads to a 7/16 inch regular hexagon.…
I had to design new PG7 mount for my Galileo2 Extruder on my Voron 2.4. I have Galileo extruder with TAP and scrab brus on the end … me previous mount https://www.printables.com/model/877290-pg7-mount-for-galileo2 was working just fine…
This terrain set will be great addition to your rpg campaign. For the best result you need to add brim when print with large numbers of elements.
With a pair of velcro strips at the bottom and an optional strap, StopGrip 's mission is to prevent boxes, buckets and groceries from sloshing around the boot of your car. BOM Velcro strip 2 × 20mm × 100mm Gorilla glue or similar to…
Compatible with the original CFT1 v1, Half Upgrade, and the v2. Use v2 models for Half Upgrade and v2 radio. The v1 case provides a slightly more compact case for the original CFT1 but will not work with the Half Upgrade or v2. The v2…
The first model is a box that can be used to hold things such as a rasper, or it can also be used as a trash can. The second one can only hold the plier that comes with the Original Průša MK4 3D printer. Version 2.0 In this version, three…
Upgrade selfie stick v2 for Radiacode102/101. This spacer-joint allows a smooth change of the RC102 mount. https://www.printables.com/cs/model/552255-radiacode-102101-selfie-stick-v2 Installation: if I already have version 2 printed and…
Tired of having to change the puny coin cell battery so much? Well go big or go home! With this case and a tiny bit of soldering you can now wait much, much longer to swap batteries! Takes just over an hour to print. No supports. I just…
A parametric RPG dice holder for 1d4, 1d6, 1d8, 2d10, 1d12 & 1d20, decorated with a stylish Japanese kumiko pattern. I designed this around the exact measurements of my Rime of the Frostmaiden dice set so the fit may not be ideal for your…
These files will provide you the ability to print your own replacement parts and also add upgrades to TT/FFC too. These files work well with PETG. The complete Cabinet is available at…
I always liked the idea of the iOS settings icon on top of a stepper, but didn't wanted to cover my extruder stepper, because of the cooling of the motor bottom. Then I found the solution from Félix but it doesn't fit on the bear motor…
This is my 2nd upgrade of the K8200 3D Printer. It will transform this printer as a Prusa Mini. Part 000425 : Planetary gear, 23 teeth, 0,85 modulus
I designed this drive shaft optimization. It is a hexagonal shape with an increased section. I had issues with TPU shaft. Indeed, the coupling was grinded in early 15 minutes of uses. I decided to change the print orientation. It works…
I designed this new version of the Output bell housing in the differential of Tarmo 4 RC car. I simply noticed that it would be better to use a M2 screw for the power transmission instead of a steel wire. So you can transmite more power…
Sky Team upgrade package including box insets (upgrade bed adhesion) and upgraded switches. Based on: https://www.printables.com/model/805423-sky-team-insert-removable-tray https://www.thingiverse.com/thing:6268933
This is my 2nd upgrade of the K8200 3D Printer. It will transform this printer as a Prusa Mini. Part 000424 : Sun gear, 20 teeth, 0,85 modulus
Never loosen the threaded insert again. It can also be used for MMU2S. Parts: 1x ruthex® threaded insert M5 1x 21mm PTFE-Tube(2x4) Countersink both ends of the PTFE-Tube.…
This is my 2nd upgrade of the K8200 3D Printer. It will transform this printer as a Prusa Mini. Part 000427 : Planetary flange
Helpful to distinguish which creature is which or track status conditions. The need first arose, when my ranger learned Conjure animals. I just printed 8 wolves, but the turns took too long. So I also printed 8 of those in different…
This is my 2nd upgrade of the K8200 3D Printer. It will transform this printer as a Prusa Mini. Part 000426 : Planetary holder
This is my 2nd upgrade of the K8200 3D Printer. It will transform this printer as a Prusa Mini. Part 000430 : Planetary shaft (use 2)
All printable parts for upgrading your MK3S to MK3S+ Attention, y-rod-holder is present 4 times in the printer. If you plan to print the whole upgrade, print this part 4x. Look for a number in the brackets in the file description. the…
All printable parts for your Original Prusa MMU2S Unit Sorted by kit assembly manual chapters. You can use the file list and folder structure here to prepare parts in the same order as you will need them according to the guide.…
UPDATE: ++ some Users had issues with the size of the 128 mm and 32mm axles therefore i upload 4 variants - small, medium, large, extra large. please choose which one fits better for you, depends on the calibration of your Printer. lots…
I really loved the original model of this toothpaste squeezer but it kept on jamming. I've made a few modifications and I think now works really well. Thank you @Luke's 3D for the original design! I've printed this in Prusament PETG with…
Update 16.02.2025 : The newer X1C/P1S have minimally smaller filter niches (very tight tolerances) - I have now adjusted the size. Now fits this version the old AND newer X1C/P1S perfectly! 👌😊 It was time to replace my activated carbon…
BEFORE STARTING THE IMPLEMENTATION OF THE PROJECT, READ CAREFULLY THE ENTIRE DESCRIPTION AND VIEW THE PHOTO GALLERY !!! This is a Remix “All Gears and Axes” for an amazing project " Filament Spool Switcher & Winder " Design by…
New key features of CORE One+ Automatic grille opening adjusts the chamber ventilation based on the internal temperature. This ensures that the environment is optimal for the materials being printed, helping to reduce warping and improve…
All printable parts for upgrading your MK3 to MK3S+ sorted by upgrade manual chapters. Attention, y-rod-holder is present 4 times in the printer. If you plan to print the whole upgrade, print this part 4x. Look for a number in the…
Added a donation button for the people who want to buy me a coffee. Prusa Mini LCD backcover Protects against dust and dirt and keeps your PCB save Fits exactly Use a 3mm - 25mm screw Nice upgrade Step files included Print instructions…
Thank you for downloading and liking the model! Your support means the model reached the 400 downloads in one month milestone ! 🏆 As a thank you, Version 2.1 adds a prop silencer attachment. New prop of the SCCY CPX-2 9mm handgun. This is…
BEFORE STARTING THE IMPLEMENTATION OF THE PROJECT, READ CAREFULLY THE ENTIRE DESCRIPTION AND VIEW THE PHOTO GALLERY !!! READ THIS MESSAGE BEFORE IMPLEMENTING THE PROJECT : I am writing this message because , one of the people is causing…
The absolute best modification you can make on your Kobra 2 class printer. And it's FREE! Better cooling with true 360 coverage Quieter than stock Unobstructed nozzle visibility Fast (tooless) removal to fix clogs/replace nozzles Uses…
Summary This is my version of the modular hydroponics tower. It was inspired by the modular tower here . It has several key upgrades. More Stable: This tower has a wider base attaching it to the nutrient reservoir making it much more…
It seems most printer knobs are either good at precision/comfort, or they are good at speedy rotation, not both. This knob upgrade truly has the “Best of Both Worlds”, precision using an aesthetically pleasing, traditional “knurled knob”…
Hi guys, this is a remix of squinn's well designed Portable Cable Organizer / Winder, I thought there's a room to improve, specifically I improved the retraction of the cable where there is a foldable handle with which you can retract the…
This upgrade goal is the prevent the tensioner form tilting by containing it more on the Z and X axes. This will prevent the belt to wear unevenly and increase its life spend. Recommended Print Settings : Material : ASA/ABS Nozzle : 0.4…
MODEL DETAILS Please refer to this upgrade guide . Prusa Mini+ upgrade featuring the E3D RapidChange Revo Micro Update: Check out our new Revo Prusa Mini Edition kit for a simplified upgrade - No firmware changes are required to complete…
**SPECIAL NOTE: I've installed this only on my printer, if your printer is different, let me know and I will see if I can find a way to help. Watch the video, if you're just looking for the install, skip to that part. Print from…
__________________________________________________________________________________________________________________ Collection of all my upgrades for Ender 3 V3 SE Heatblock fan mounts: Best airflow 4020 mount 4010 fan mount Smallest 4020…
THIS DESIGN HAS BEEN STOLEN AND SOLD ON EBAY, AliExpress, Bangood etc.! PLEASE DO NOT SUPPORT SUCH SELLERS ! Version 2 added and tested with fw 3.11.0 I want to have a stiffer and more robust Y-Axis Carriage on my Original Prusa MK3. The…
Just a little favour >>>Less then 10% of downloaded Models get a like. → If you like the design, it will be nice if you click on the like button and maybe share your print. Newer upgrades are on my new upload…
G1 Transformers Optimus Prime base on 1984 Transformers TV Series. This is fully articulated model but not transformable. Disclaimer: Contains small parts and requires high precision. Your printer may need to be properly calibrated for…
I lenghtened the holder by 8mm in order to accommodate wider tubes. Original Description from @ ScrapyCoco Description PDF I really loved the original model of this toothpaste squeezer but it kept on jamming. I've made a few modifications…
Decided to make my own version of the M18 battery adapter. This is a bit more involved than some of the others on here. Its two pieces which can be printed without supports. It uses 5 M3 flat head screws and nuts to hold together. The two…
________________________________________________________________________________________________________________ My other Ender 3 V3 SE mods Fan mods: Ultimate Ender 3 V3 silent upgrade Printer mods: Tool holder Filament spool handle…
Advantages : Better support for the foot extension. Foot extension will never fall off again. You will never lose the foot screw. 2 versions : with or without the bottom panel Recommended Print Settings : Nozzle : 0.4 Layer height : 0.2…
Not recommended for beginners. also available on Makerworld https://makerworld.com/en/models/1636170-mmu-multi-material-upgrade-diy#profileId-1728491 The Pico MMU is an open-source project designed to enable multi-material 3D printing on…
Video guide: Text guide: https://e3d-online.dozuki.com/Guide/Convert+your+stock+Anet+A8+to+the+Hemera+toolhead/131#s1512 Get the ready-to-go firmware here: https://toms3d.org/wp-content/uploads/2019/11/Marlin2-source-A8-20191129.7z…
This mount raises the PG7 so you don't have a large “S” loop when using the smaller mounts. This design was provided by Nyxcode on Voron discord. Enjoy
Eliminate the sloppy fit between your filament spools and the spool holder that came with your Creality printer. This poor fit causes eccentric rolling of your spools while printing which can lead to non-uniform extrusion as the extruder…
I rotate 90 degrees, increased 1,5mm of the lock and made the hook that rests on the printer thicker, about 1.5mm (previously it was 1mm). In addition to these other changes, I placed the Letters K1 on the side of the spool holder PLA…
Prusa Mini LCD backcover Print on it's flat face with supports Installation: First, unplug the LCD display cable on the back of the PCB. Then remove the 4 m3 screws holding the PCB in place, and slide the printed cover panel in. Reinstall…
I have incorporated several ideas into a single model. Remix of the official enclosure risers. Remix of Riser D, took the remix of santa(lemuroff) and added HSW on his model. Check out my spool holder remix as well. I took the idea of…
this is an upgrade of ''dummy13FANBOY'' version including a revised version of the frame and new upper and lower armor parts to fit an extra set of arms. I added flat spot on the second set of joint on the frame for easier printing and…
Relocate your runout sensor to the top of the tool head. Works for Kobra2 Max,Plus,Pro -No supports necessary JST connectors (no soldering or modifying necessary.) Just plug 3 in line to extend: https://a.co/d/bYScS67 Use with this handy…
For the M12 version click here This remix adds a cutout so the cable can be removed more easily, and has redone PG7 threads for a better fit. This mount does not interfere with titanium gantry backers (see photos). Y endstop relocation I…
This is a remix of Hartk's PG7 mount with some clearance added to fit alongside Minsekt's Y endstop relocation mount . Hardware (affiliate links): Microswitches: https://amzn.to/42ESw9v PG7 cable glands: https://amzn.to/3LL98FD If you…
Update: 6 june 2019. I've made a new version with even more clearance, and even more robust walls. It's visible in orange in the screen grabs (V1 in cyan, original in red). Keep in mind that this version is designed for use with socks,…
You like my Work? Support my efforts and push the like ❤️ Make my day and post yout Makes 🤗 New version of the Z-axis top with additional ball bearing for more stable guidance of the trapezoidal spindle. I don't know if you really need it…
I love the game Sky Team and played it a lot, but activating the cardboard switches did not feel very satisfying. My design features real switches with status LEDs and automated LEDs for the landing gear, landing flaps and brakes. All…
This is a remix of jphalip's Voron 2.4 A Drive PG7 umbilical mount, which was a remix of Hartk's PG7 mount. The endstop carrier in jphalip's model was from Minsekt . In this version the PG7 hole location has moved slightly to be centered…
Please give it a ❤ if you like it 🥰 Video : Please give it a ❤ if you like it 🥰
If you find this thing useful, please consider sending a tip. Thanks! https://paypal.me/cdsmakestuff Creality Ender 3 / Pro / V2 (?) --- I can only assume this could work for the V2... don't have one to test with. Part Cooling / Hotend…
For Volcano hotend use https://www.printables.com/model/641666-volcano-windwarden-upgrade-elegoo-neptune-3-pro-pl Innovative Efficiency and Style - WindWarden 5015 Fan Adapter Model for the Neptune 3 Pro Plus Max Stock Hotend 3D Printers.…
this is an upgrade to a very nice display holder that i use these build extends the original design and offer a different display mount because i wanted something slimmer that wont engulf the hole screen. this model is fully incorporated…
This mod is meant to make your life easier when you need to couple/decouple the PTFE tube. Bill of Material ECAS04 PTFE connector M3x20mm SHCS threading screw (one of the screws that were holding the bed for the shipping) M3x6 mm FHCS…
Moving the filament holder from the top position to the side will increase the stability of the printer while improving filament guidance to the extruder. As an addition to this filament holder on the side of the printer, I recommend…
The original was slightly modified and the storage compartment was added on top. It is designed to hold various tools, printing plate(s) and stash the glass cover higher when necessary, especially when printing with PLA. This design was…
Update 8/9/25- Based on some feedback the starting gcode was not mimicking the original profile from the K1 Max. I changed it and uploaded v8. PLEASE PLEASE PLEASE leave feedback! I want to make sure this is working and not useless to…
Bring your tabletop games, dioramas, or display shelves to life with this medieval Castle Tower! This support-free 3D print is quick, clean, and full of character - ideal for RPG adventures, fantasy setups, or just adding a little…
The Bear Frame Upgrade : With the current bear parts, you won't be able to upgrade to the MK4(S). Since Greg sadly can't update the bear project himself right now, I decided to fill the gap, so that we can all continue to use our Bears…
This is a remix of MrTeliP and Voron 2.4r2 PG7 Cable Gland and Endstop, which was a remix of jphalip's and Hartk's PG7 mount. I added a new endstop mount so you don't loose any Y print area. The bumper of this mod from Cris Persi is…
This is my version of Ender 3 V3 SE cooling upgrade to dual 5015 fans, 40mm silent hotend cooler and LED (optional). I decided to use 12V 4010 cooler due to was planning to connect LED to the same DC-DC step-down converter. To assemble…
The float can be joined without the use of glue.
Flexo head and upgrade parts for: https://www.printables.com/model/795837-bender-bending-rodriguez-futurama-modular https://www.thingiverse.com/thing:6470320 Added holes to limb parts, now you can use rubber band to make them little bit…
Fan duct upgrade for kingroon kp3s Titan head. Previous one was melt in a day, so I remixed it. Print with ABS with 100% infill and use tree supports! (Screw holes must be bottom when printing) +I added duct for e3d V6 nozzles
Thanks to feedback from a user of my very popular miniature vice with table clamp, I realized that access to the the hand knob on the vice was a bit hindered by a part of the table clamp. If you don't have the vice yet, get it here:…
Simple replacement cable cover for the A drive of a Voron Trident to accept a PG7 cable gland for a CAN umbilical. Its a little wider and has screw-in threads for the common PG7 cable glands which are big enough to allow a genuine Molex…
this is a low profile LED COB strip mod for the Bambulab X1C and X1 printers. This prints in four pieces and is securely held together with 4ea M3x16 screws. I recommend this kit.…
Updated!! 28mm Modular Medieval RPG House – FDM-Friendly Build the perfect tabletop RPG setting with this modular 28mm medieval house, designed for easy printing, gameplay, and future expansions. Whether you’re running D&D, Pathfinder,…
Quick to print, support-free design. The Volcano WindWarden adapter mounts a 5015 blower for improved cooling after upgrading to a Volcano hotend. No screws are needed to hold the fan — it clips in securely. The height is adjustable to…
A simple droid build, orange caps hold two part base together. The uploaded size creates a 6" ball, approximately 7.5" tall. Ball is hollow if anyone wishes to build electronics. Another one-off birthday present for my daughter who is in…
Modified Mike F's " SB2209 / SB2240 mount for PUG " for use with a PG7 Cable Gland. This one has M12x1.25 threads so the PG7 can screw directly in. 2 versions included, 1 has a cutout and one doesn't. I haven't tested this yet, but I'll…
Original Prusa MMU2 to MMU2S upgrade printable parts Note, these are not the parts for the MMU2/S unit itself nor the parts for the i3 to MMU2S upgrade.
If you have an umbilical that goes all the way from the toolhead to the electronics bay and can't be bothered to redo the wire path, these cable cutouts let you just slip the existing wires into the endstop relocation mount. I've attached…
please leave a review if you like this model and let me know if what you would like me to make next
![Kumiko RPG Dice Holder [Parametric]](https://media.printables.com/media/prints/82eb7505-58de-4e60-b337-2c383a0f003f/images/10872560_c1d5f70e-d21f-493c-abb2-33b7298bc920_60912808-6c92-4b47-b8f3-853fea033c37/basic-kdh-edited-render.png)
