DJI Mini 2 Ipad Mini mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
My own version of an ipad mini mount for the DJI drone remote
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 23
- Wydruki
- 0
- Wyświetlenia
- 133
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Gadgets
- Licencja
- Creative Commons — Attribution — Noncommercial
Having had some inspiration from other models, I decided to model my own, lockable version for the iPad mini and DJI remote. You'll need an M3 brass insert, a 16mm M3 bolt (Socket cap) and the following model from Printables (thank you to the OP, saved me a job!;) )
https://www.printables.com/model/3634-m3-thumbscrew
This is two model files, a clamp and mount, should be printed in the orientation shown in the screen shots. M3 Insert into the mount and M3 bolt through and in, totally removeable and very quick and easy to use. I've printed mine in CF ASA, beause that's what i had loaded but ultimately, you can use whatever.