Gridfinity Stackable Bins
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
1x1, 2x1/1x2, 2x2 Stackable standard 42mm Gridfinity Bins.
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 33
- Wydruki
- 0
- Wyświetlenia
- 392
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Here is my take on stackable Gridfinity storage !
You can find 4 version of this model :
1x1 Gridifinity Size, with 3 Bins
1x1 Gridifinity Size, with 4 Bins
1x2 / 1x2 Gridifinity Size, with 3 Bins
2x2 Gridifinity Size, with 3 Bins
For each model you can find the Lid that snaps onto the outer shell (outer bin) which you can slide each bin into. The outer shell is 9 units tall without the lid added on top. You can also print the label which you can snap onto the Lid using 2 notches back and front of it, do not forget to face the 2 triangle pairs for alignment. And a sticker measuring 30x50mm or 30x30mm can be placed underneath it to keep track of what's inside.
To achieve the best contrast, I suggest using the color scheme provided by the 3mf files.
Print Profile :
Layer Height : 0.2 mm
Use Arachne wall generation
I recommend ironing the topmost layer of each bin for better number visibility (60mm/s, 30% flow)
Support : Only needed for the "Lid" AND On build plate ONLY ( Normal Grid Support Recommended)
If you find any design flaws or would like to give me suggestions, please don’t hesitate to contact me.