1 / 2
Stiga Autoclip 200-Series Terrain Kit (Wheel Spikes Upgrade) — zdjęcie 1
1 / 2

Stiga Autoclip 200-Series Terrain Kit (Wheel Spikes Upgrade)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Upgrade for Stiga Autoclip 230/2xx. Improves traction massively, letting the mower plow through tall grass like a tank.

Ocena
0 / 5
Polubienia
2
Pobrania
13
Wydruki
0
Wyświetlenia
135
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution

Turn your Stiga into a tank.

If your Stiga Autoclip struggles with uneven ground, loose soil, or overgrown patches, this terrain kit is the ultimate upgrade. Designed specifically for the Stiga Autoclip 230, this mod should also be compatible with any Stiga Autoclip 2xx-series model.

The stock wheels can sometimes slip, causing the robot to dig holes or get stuck. These add-on spikes attach to the inner rim of the wheels, aggressively gripping the ground.

Performance Upgrade: Once installed, the difference is night and day. This upgrade greatly improves terrain capabilities. The Stiga will now plow through grass taller than the mower itself like a tank, without losing traction.

Design: The design fits perfectly on the inside of the existing wheel geometry. To make printing easier and to fit standard print beds, the ring is designed as two separate objects that lock together with connectors.

Build Instructions

  • Material: PETG or a similar durable, UV-resistant filament is highly recommended. PLA may deform in the sun or crack under mechanical stress.

  • Settings: Durability is key here. The harder and stiffer the part, the better it performs.

    • Increase your Perimeters (Walls).

    • Increase Top and Bottom layers.

    • Use a higher Infill %.

  • File: The included .3mf file contains the specific print settings I used for success.

Installation

  1. Print the two halves of the terrain ring.

  2. Connect the two pieces using the printed connectors.

  3. Place the assembled ring against the inside of the robot mower's wheel.

  4. Fasten it securely using the existing screw holes found on the wheel (no drilling required).

Tagi