Ikea NORDVIKEN Chair Towel holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A holder to hang a kitchen towel on the back of a NORDVIKEN Chair
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 3
- Wydruki
- 0
- Wyświetlenia
- 23
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
A holder to hang a kitchen towel on the back of a NORDVIKEN Chair (https://www.ikea.com/us/en/p/nordviken-chair-antique-stain-30488546/#content)
Frictions fits on the top of the chair's back
I recommend printing the arms in some kind of flexible material like TPU so that it is soft enough if it gets bumped into something. I got good results with Bambu TPU for AMS (Shore Hardness 68D), 95A TPU may also work but could be too soft.
Use some support for best results
You will need a large printer for the holder itself, Prusa XL for example, though it may fit on the new CoreOne L (untested).
Printed in Prusa Woodfill Linden light
Slide the holder in place between the two arms (hence the recommendation for flexible arms). It can be screwed in place if too loose but mine ended tight enough and holds very well without screws