1 / 5
IKEA Nordli Dresser Drawer slider reinforcement fix — zdjęcie 1
1 / 5

IKEA Nordli Dresser Drawer slider reinforcement fix

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

the drawer slider pin tends to rip through drawer of this IKEA dresser, this fixes and reinforces it

Ocena
0 / 5
Polubienia
2
Pobrania
16
Wydruki
0
Wyświetlenia
390
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Bedroom
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Overview

The drawer slider pin on this dresser tends to rip through the drawer and the drawer becomes impossible to use since the slider will not stay attached to the drawer.

Example drawer

The pin that on an unbroken drawer

Before the Fix

After the fix

Print Settings

The template can be 15% infill, but the parts should be 2 walls, 50%.

How to Use

Use the template print to mark the part to cut out of the drawer, and cut it out. Push the template pin into the hold above the broken area. There is a notch to mark the top of where the part should go, and the bottom of the template marks the bottom.

Then add the part, and screw in with countersunk screws so it doesn't bind against the slider.

Tagi