TwistVent Adjustable Duct Cover [OpenSCAD]
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A simple adjustable vent cover for circular air vents. Customizable with OpenSCAD.
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 31
- Wydruki
- 0
- Wyświetlenia
- 109
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Share Alike
An easy air-duct cover that can be adjusted to change the airflow.
Printing:
I printed mine in PLA at 0.3mm layer height with 3 perimeters.
No supports needed.
Preparation:
I recommend printing the test collar first to be sure the diameter is dialed in for your vent. it prints in just a few minutes and can save you lots of time and filament if it's slightly off.
If it doesn't fit, estimate how much bigger or smaller it needs to be and change the duct_inner_diam parameter. You want a fairly snug fit.
Assembly:
Print the core and push it into the open duct.
Print the bezel cover and snap it onto the core.
Now just twist the bezel to increase/decrease the airflow.