Anti-Slip Radiator Hook / Heated Towel Rail Hanger (PETG Tested)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Stop your towels from slipping onto the bathroom floor with these ultra-durable, heat-resistant radiator hooks!
- Ocena
- 0 / 5
- Polubienia
- 12
- Pobrania
- 59
- Wydruki
- 0
- Wyświetlenia
- 215
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bathroom
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This hook features a custom "horn" shape specifically engineered to hold towels, bathrobes, or cloths securely without letting them slide off. Designed to snap or hang directly onto the horizontal tubes of standard heated towel rails, it has been thoroughly tested for months under real-world conditions, successfully withstanding both constant heat and weight.
💡 The Secret to its Durability (Maker's Note)
After several mechanical and thermal tests, I came to a crucial conclusion: printing this hook hollow lasts significantly longer than printing it solid (100% infill).
The internal air chamber trapped inside acts as a thermal insulator, preventing the constant heat from the radiator from softening the core of the plastic over time.
📐 Print Settings (Crucial for Heat Resistance)
To achieve the exact same durability and heat resistance as the tested version, please follow these guidelines:
Material: PETG (Highly recommended for bathroom/radiator environments. Do not use standard PLA as the heat will deform it).
Supports: No supports needed! (Print flat on its side).
Infill: 0% (Hollow). Trust the physics—the internal air pocket improves thermal performance.
Perimeters (Walls): 4 to 5 walls. This gives the hook its entire structural strength since it has no infill.
Layer Height: 0.20mm works perfectly.