Jabra Evolve2 65 USB Adapter Holder (Remix)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A holder for the Jabra Evolve2 USB adapter, fixes to headset headband. 3 variants (Model C for TPU Only)
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 13
- Wydruki
- 0
- Wyświetlenia
- 85
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Audio
- Licencja
- Creative Commons — Attribution — Share Alike
The Jabra Evolve2 65 USB adapter can be fixed to the headset (remix).
Model A & B
Model A has the original zig-zag mount clamp.
Model B has a wider opening, for easier install (straight, non-zig-zag opening).
Print in PETG or PLA.
I printed in PETG due to seeking a rigid, strong model.
No supports are needed.
I went with 0.2mm and 100% infill. Solid as a rock!
Model-C: Printed in TPU, it's a tighter fit (due to material compression), will not work fit headset using PLA, PETG or other harder materials.
I went with 0.2mm and 100% infill.
Note: I recommend Model-C ONLY for TPU. And models A & B for any other non-TPU material!
Vital change for this remix was the dual ridges and narrower gap in the USB mount to hold the dongle very snug. All 3 models printed and tested OK by author.