1 / 9
12032 Voron Part Cooler Blower Duct with Inverted Electrical Access- FreeCAD 1.2.0dev — zdjęcie 1
1 / 9

12032 Voron Part Cooler Blower Duct with Inverted Electrical Access- FreeCAD 1.2.0dev

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A duct to draw cooler air to the blower and expel heat with the door open. Remove the 90 deg elbow when in use.

Ocena
0 / 5
Polubienia
3
Pobrania
7
Wydruki
0
Wyświetlenia
270
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial

First off, this does not block the Inverted Electrical Cabinet access. Just slide the new duct upwards on the blower housing. See the pics. Watch out for how the blower leads are routed.

I usually print ABS but when I switch to PETG my chamber temp is too high even with the door open. What I've done is pull off the 90 blower outlet and let the blower push the air straight upwards. The blower pulls cooler air in from below and forces the hotter air out through the top of the door frame. It worked rather well but sometimes my PETG, with the bed set to 80C, would still soften and jamb if I didn't set up another fan to force some extra air into the Trident. 

This little duct, when clipped to the blower housing, draws in air from very low down rather from just under the heated bed set to 80C. Now, when printing PETG, I just pull off the 90, open the door and start the print.  OrcaSlicer starts the Auxilliary Cooling Fan and my prints finish without fuss.

Don't forget to remove the 90 degree outlet from the top when printing PLA or PETG! You can leave this new duct in place for all prints.

I've also included the FreeCAD file if anyone wants to see how I made this. Due to several revisions, my workflow and design tree isn't really stellar!

You may also be interested in my other Voron Trident mods shown here or at https://www.printables.com/@JimChristian_3198049  &  https://www.printables.com/@JimChristian_3198049/models  They work well  :-)

Also, if you find value in this, please give it a like. Thanks.

 This duct was created use FreeCAD that I compiled from source. It should have produced a file that works with a current Appimage.  Probably :-)

OS: Debian GNU/Linux 13 (trixie) (X-Generic/xwayland)

Architecture: x86_64

Version: 1.2.0dev.44585 (Git)

Build date: 2025/12/05 22:07:14

Build type: Unknown

Branch: main

Hash: 6ec9870d5456108ce6a354619e406d4369f7a441

Python 3.11.13, Qt 6.8.3, Coin 4.0.3, Vtk 9.3.1, boost 1_86, Eigen3 3.4.0, PySide 6.8.3

shiboken 6.8.3, xerces-c 3.3.0, IfcOpenShell 0.8.2, OCC 7.8.1

Locale: English/United States (en_US)

Navigation Style/Orbit Style/Rotation Mode: Blender/Rounded Arcball/Window center

Stylesheet/Theme/QtStyle: Darker.qss/Darker/

Logical DPI/Physical DPI/Pixel Ratio: 96/96.237/1.25

Installed mods:

* OpenTheme 2025.5.20

* ProDarkThemePreferencePack 1.0.0

* freecad.gears 1.3.0

* FreeCAD-themes 2025.6.4

Tagi